aismon

Receiving, Decoding and Plotting AIS using a RTL-SDR

DrVarnik on YouTube has posted a tutorial video on how to receive, decode and plot AIS information. The Automatic Identification System (AIS) is a system used for automatic tracking of large ships and passenger boats. It is a similar idea to tracking aircraft with ADS-B. His method uses a RTL-SDR for receiving the AIS signals with SDRSharp, decoding received signals with AISMon and plotting the decoded information with OpenCPN. He uses VB-Cable for looping the audio from SDRSharp to AISMon, but if you have a ‘Stereo Mix’ or equivalent feature with your soundcard, that will be unneeded. Best results will be achieved using a narrow-band vertically polarized antenna tuned for 161.975 MHz and 162.025 MHz (marine VHF). A directional antenna would also likely be a benefit. You can find some designs to try lower down the page. For safety, please only use this guide on land! Wouldn’t want you getting lost at sea.

Here are the homepages of the software used:

  • SDRSharp
  • AISMon – You may need to first join the group with a Yahoo account to gain access to the file section.
  • OpenCPN
  • VB-Cable (for looping audio from SDRSharp to AISMON)

Below is a screenshot of OpenCPN in action:

opencpn

Here are some antennas designed for AIS reception:

 

For a tutorial with other software, check out the Cheap AIS Ship Tracking page at rtl-sdr.com

Decoding Flex 1600 Pager Traffic with SDR# & PDW

NeedSec just posted on YouTube a video illustrating how to use a RTL-SDR to decode Flex 1600 pager traffic using PDWVB-Cable and SDR#. It is always surprising there is still pager traffic as when is the last time you can remember seeing someone with a pager in public. We’ve shared videos showing this sort of thing before, but NeedSec gives a great overview of what you need to do to accomplish successful decoding of Flex-1600.

 

© 2017 RTLSDR.com. All rights reserved. Site Admin · Entries RSS · Comments RSS