NT1K.com – RTL-SDR W/ RTL3832U & FC0013 Tuner

NT1K.com - RTL-SDR W/ RTL3832U & FC0013 TunerMessing around with a EzTV645 W/ the RTL2832U and FC0013 Tuner Chip. Software being used is SDR# (SDR Sharp). I’m having some issues like getting mixed FM boardcast signals no matter where I’m at and multiple images of the same signal. I was told this was normal as I thought I messed something up while soldering in a pig tail to replace the current RF connector. See for more information Source

(more…)

20120529 2207 29 – RTL-SDR – FM RADIOS

20120529 2207 29 - RTL-SDR - FM RADIOS Source

(more…)

Exploring with RTL-SDR and Gqrx

Exploring with RTL-SDR and GqrxVideo showing basic principles of operation for Gqrx using Realtek RTL2832U tuner. Tuning into some strong local FM stations at the beginning, then switching over to 930 MHz to listen to some pager transmissions. Source

(more…)

Cocoa Radio GUI

Cocoa Radio GUIThis is an early prototype of the user infertace for Cocoa Radio, the SDR app I’m writing for the RTL-SDR on Mac. Source

(more…)

GQRX – v2.1 (from git)

GQRX - v2.1 (from git)v2.1 GQRX (with support for RTL2832U) git clone github.com cd gqrx qtcreator gqrx.pro #then : build all & deploy all Source

(more…)

SDR# Rev 304 + EzTV666 RTL2832U, Commercial FM (Keyboard Tuning)

SDR# Rev 304 + EzTV666 RTL2832U, Commercial FM (Keyboard Tuning)Testing SDR# Rev. 304 Source

(more…)

GEDOMIS testbed (part 1)

GEDOMIS testbed (part 1)GEDOMISĀ® (GEneric hardware DemOnstrator for MIMO Systems) is a multi-antenna wireless communication testbed that enables the prototyping and evaluation of physical layer algorithms featuring MIMO techniques. This is feasible thanks to its heterogeneous and reconfigurable structure comprising mixed FPGA and DSP baseband signal processing components, which can be used for the implementation and real-time validation of broadband wireless communication systems. GEDOMISĀ® is currently hosting an IEEE 802.16e-2005 system (mobile WiMAX) featuring a 2×2 MIMO configuration with a high channel bandwidth of 20 MHz. The physical layer algorithms of the receiver were modeled in Matlab, designed in VHDL and implemented in a real-time FPGA platform from Lyrtech Inc. For more information visit our webpag Source

(more…)

© 2021 RTLSDR.com. All rights reserved. Site Admin · Entries RSS · Comments RSS