RTLSDR.com

This video shows the progress made on Cocoa Radio since the last video. The spectrum that is visualized in the waterfall and graph is AFTER the downconversion mixer and FIR filter. As I move the red line (software tuning) around on the display, it changes the tuning of the downconverter, and you can see the spectrum change. Also, when I change the IF bandwidth, you can see the effects of the filtering. There’s still quite a bit of work to be done, but these results are encouraging. – Source

(more…)

Testing out the EzCap EzTV668 that has the RTL2832 and the E4000 Tuner Chip. I think it’s much better that the FC0013 Tuner. However don’t take my word for it. For $20 you can’t complain either way at 00:40 you will hear a conversation on a local repeater (W1TOM 146.940), One of the stations is close by my QTH and with the 2Mhz sampling, you can see both the output of the repeater and the -600khz input from the operator. – Source

(more…)

$20 TV tuner as an IF receiver for my 10 GHz transverter. Two beacons are received, one on Frazier Mountain and the other from Palos Verdes. My station is in Redondo Beach with a clear view to the n – Source

(more…)

Test taniego odbiornika SDR opartego o RTL2832U Model LV5TDLX DVB-T USB – Source

(more…)

First attempts on trying the Noxon DAB Stick at 144.800 MHz APRS with the delivered Antenna (indoors). See more here: sdr.osmocom.org This Stick was designed for listening to DAB only. Under Ubuntu it works for DVB-T and as a SDR with a Bandwidth up to 3.2 MHz. Tuning range could be from 64-1700 MHz (not tested with this NOXON Stick) 73 Oliver DL6KBG – Source

(more…)

wiki.spench.net | Twitter: @spenchdotnet twitter.com Do the same on Linux & Mac OS X: wiki.spench.net ultra-cheap-sdr Google Group: groups.google.com This is a simple demonstration showing how one can receive HF using the ultra-cheap RTL2832U-based DVB-T USB dongle and a transverter (to move the HF signals into the range that the tuner in the dongle can receive). – Source

(more…)

This is a test of the WFM demod with SDR# and the RTLSDR. Yes I know I have a lot of noise, this is due to Corsair power supplies. I would never recommend a Corsair power supply. – Source

(more…)