Measurements of E4000 Filter Responses

I wrote a octave wrapper around the rtl-sdr library of osmocon. With a little change, to also export the rtlsdr_i2c_read/write_reg function as well as the rtlsdr_set_i2c_repeater function. I then let the standard library do its normal work and just before measuring, I overwrite the E4K_REG_BIAS, E4K_REG_SYNTH1 and E4K_REG_FILT1 registers to their appropriate settings.

Raw data is available. The image itself is pretty raw. The only modifications are a shift of 3 dB below 350 MHz, to compensate the loss due to for 3-phase mixing. and a moving average of 10 samples, to smoothen the curve a little.” — kirepudsje

Source: Reddit Post

Alternative ExtIO for Compatible SDR Software

The folks over at SDR# have uploaded an updated plugin for ExtIO compatible software.

You can download your copy from [LINK REMOVED – it appears SDR# has removed the file]

To use it, extract to the same folder as SDR#/HDSDR/WRPlus/etc and select the ExtIO_RTLSDR.dll depending on your software instructions. (HDSDR will prompt you which ExtIO plugin you want to use if you already have another ExtIO DLL installed.)

© 2018 RTLSDR.com. All rights reserved. Site Admin · Entries RSS · Comments RSS